Site icon CharCoat Passive Fire Protection

CharCoat IC Testing

The national utility (Originally Eskom), had undertaken comprehensive evaluation of coating materials over a number of years at their Koeberg Insulator Pollution Testing Station. Situated on the west coast of the South Africa, the various energized samples are exposed to the extreme marine conditions characteristic of the site. Physical degradation, leakage current amplitudes and flashover occurrence are closely monitored. As an example of the results achieved at this facility, Figure 1 shows the relative cumulative leakage current flow on three identical insulators – two of which are coated with different brands of silicone rubber and the third left un-coated. It is evident that the silicone rubber significantly improves the insulator performance and, further, that the extent of the improvement is dependent on the type of rubber used.

Figure 1: Accumulated coulomb ampere leakage currents measured on coated and un-coated porcelain insulators over a period of one year.

The performance of a porcelain insulator coated with CharCoat IC compared to dimensionally identical units but of different materials, is illustrated in Figure 2. It is interesting to note that the leakage currents on the coated porcelain are significantly less than even the silicone rubber composite unit. This is not only due to the excellent hydrophobicity and hydrophobicity transfer rate of CharCoat IC but also the more efficient thermal transfer possible through the coating layer to the ceramic substrate.

*Originally Tested as Insilcote HV2000

Figure 2: Average leakage current amplitudes in relation to time-of-day, measured on identical insulators of various material over a one year period.
Hydrophobicity after 3 yrs with CharCoat IC
Preparing to coat Large Insulators with CharCoat IC

Contact us today for a no-obligation, free quotation

Exit mobile version