Site icon CharCoat Passive Fire Protection

Steel Coating

With nearly all structures, there is fire protection. With Steel Structures, especially the structural elements of the buildings, passive fire protection is required, and throughout most of the world, by law.

CharCoat has teamed up with Rainbow Paints to offer FM-906 Intumescent Thin Film Steel Coatings (WB and SB) for structural Steel fireproofing.

Our CharCoat FM-906 Range of Thin Film Intumescent Coatings for structural Steel is the answer. Tested and approved for 120 minutes under BS476: part 21 UL Classified, BOMBA approved for Malaysia with ongoing testing for structural elements, whether beam or column and including hollow sections.

CharCoat FM-906 is also tested and approved under BS476: part 24 for ventilation ductwork and mechanical Ductwork up to 120 minutes. The CharCoat FM-906 Range is the perfect cost-effective solution for your steel construction needs.

Spraying CharCoat FM-906
Painted with CharCoat SC

Incredibly thin, the CharCoat FM-906 Range can be applied for interior or exterior works. Nearly all applications and steel sections are covered by the FM-906 range. For interior applications, no topcoats are required, but may be used simply for colouring of the steelwork. Exterior works always require a topcoat.

Note: While topcoats are not required for interior conditioned spaces, a decorative topcoat may be applied for aesthetic purposes. For environmental exposure concerns in non conditioned spaces, we recommend the use of an exterior topcoat.

CharCoat FM-906 pre-erected
CharCoat FM-906 before walls
CharCoat FM-906 coated in blue

No mesh reinforcement is required with any of our coatings.

Why fireproof paint for steel is necessary?

Strength and durability are some of the reasons steel is used in building construction today. Steel is one the strongest construction materials, used in buildings across the world. However, this strength is challenged by the severe heat of a fire. In a fire, it can take only minutes for unprotected steel to reach critical failure temperature of 550ºC, at which point it loses its capacity to bear load, leading to structural failure and collapse. In fact, strength loss starts already at 300ºC, which is why you need fireproof paint for steel.

For Any Application requirement, CharCoat Passive Fire Protection can calculate all of your Fireproof Coating needs based on a fireproofing Bill of Quantities, just send us the Fireproofing Steel Schedule and we will help with all of your estimations. Its that easy.

Our CharCoat FM-906 Range Provides Intumescent Fire Protection while maintaining architectural aesthetics for commercial (and Industrial) construction including:

  • Stadiums
  • Low-rise and high-rise construction
  • Cinema’s
  • Shopping complex’s
  • Hotels
  • Airports
  • Office Buildings
  • Warehouses
  • Power Stations
  • Mines Smelters,
  • Pulp Mills and many others
Exit mobile version